A new generation of electric mobility deserves a considered approach to protection.
The Proton e.MAS 7 represents a significant step in Malaysia's automotive landscape, introducing an all-electric SUV designed around everyday usability and contemporary design.
For this example, finished in a distinctive green metallic appearance, the protection priority was simple: preserve the original exterior before daily driving takes its toll.
Ceramic Pro Composite Protection Film was selected under a Full Wrap package, introducing a clear protective layer designed to help defend covered painted surfaces against selected everyday hazards.
From its sculpted front end to the broad rear tailgate, this is a closer look at the vehicle, the film technology and the actual installation behind the result.
INSTALLATION AT A GLANCE
- Vehicle
- Proton e.MAS 7
- Exterior
- Green/teal metallic-looking finish
- Service
- Paint Protection Film
- Film
- Ceramic Pro CPF
- Technology
- FCCT — Flexible Ceramic Composite Technology
- Package
- Full Wrap
- Film warranty
- 5 years against specified manufacturing defects, subject to applicable terms
01. The Vehicle
A New Chapter in Malaysian Mobility.
The Proton e.MAS 7 marks an important development for Malaysia's automotive industry.
Introduced as Proton's first battery-electric vehicle, the e.MAS 7 brings an electric powertrain into a familiar SUV format.
Its design is contemporary without appearing unnecessarily complicated.
The front end features a largely closed surface, slender lighting elements and clearly defined lower bumper sections.
Along the sides, the body uses flowing surfaces, relatively restrained character lines and flush-style door handles.
At the rear, a wide horizontal lighting element connects the tail lamps across the tailgate, reinforcing the vehicle's broad stance.
These design details establish a clean visual identity.
Rather than relying on oversized decorative elements, the e.MAS 7 uses its proportions and surface transitions to create a modern appearance.
The Green Exterior.
This particular example features a green/teal metallic-looking finish that changes in appearance under different lighting.
Inside the Ceramic Pro studio, reflections travel across the bonnet, doors and rear quarter.
The finish appears brighter where overhead lighting strikes the paint and deeper along shaded body surfaces.
The colour contributes significantly to the vehicle's identity.
It is also a reason to consider physical paint protection.
High-gloss painted surfaces can develop visible marks through everyday road exposure, incorrect washing and contact with contaminants.
Protecting those panels early helps owners reduce selected risks before cosmetic wear becomes more noticeable.
Vehicle & Protection Details
| Detail | Information |
|---|---|
| Vehicle | Proton e.MAS 7 |
| Manufacturer | Proton |
| Vehicle category | Battery-electric SUV |
| Exterior | Green metallic-looking finish |
| Protection brand | Ceramic Pro |
| Product | Composite Protection Film |
| Technology | FCCT — Flexible Ceramic Composite Technology |
| Package | Full Wrap |
| Film appearance | Clear, glossy |
| Installation market | Malaysia |
02. Why Protection Matters
The Paintwork Is Part of the Investment.
Electric vehicles introduce a different driving experience, but their exterior paintwork remains exposed to familiar road conditions.
Stone chips do not distinguish between a battery-electric SUV and a petrol-powered car.
Neither do roadside debris, environmental contamination or improper washing methods.
The Proton e.MAS 7 may represent a newer generation of vehicle technology, but its bodywork still benefits from careful ownership.
That is the purpose of this Full Wrap project.
Ceramic Pro CPF creates a transparent physical layer over selected exterior surfaces.
Its protective construction is designed to help reduce the likelihood of certain minor road hazards reaching the paint underneath.
Why Protect an Electric SUV?
The e.MAS 7 has several exterior characteristics relevant to PPF installation.
The broad bonnet forms a prominent visual surface.
The front bumper includes angular transitions around the lighting and lower sections.
The side panels provide large painted areas.
The rear quarter and tailgate create additional curved surfaces that remain exposed during normal use.
These areas contribute to the overall appearance of the vehicle.
A Full Wrap approach extends the protection objective beyond a conventional front-only package.
The Difference Between Full Front and Full Wrap.
Full Front PPF generally prioritizes common forward-facing impact areas.
These include the bonnet, front bumper, front fenders, headlights and other specified components.
Full Wrap provides broader coverage across the agreed exterior package, extending into the side and rear sections.
For Ceramic Pro CPF, the official Full Wrap package includes front, side, rear and upper-body protection areas as described in the product's current coverage schedule.
This makes Full Wrap relevant to owners who want a more comprehensive approach to exterior paint preservation.
However, Full Wrap does not automatically mean every vehicle component is protected.
Glass, wheels, rubber seals, sensors, interior surfaces and some trim areas may require separate products or may be excluded.
The final coverage must follow the agreed vehicle-specific package.
03. Ceramic Pro CPF Technology
Beyond Conventional Paint Protection Film.
Ceramic Pro CPF stands for Composite Protection Film.
It combines the physical protective function of PPF with ceramic surface technology.
This distinction is important.
A conventional ceramic coating is a comparatively thin surface treatment focused on characteristics such as gloss, hydrophobic behavior and easier maintenance.
Paint Protection Film introduces a physical material layer designed to help absorb or reduce selected impacts and abrasion.
Ceramic Pro CPF combines film-based physical protection with a ceramic-oriented surface system.
It should not be described as merely a ceramic coating, nor as an ordinary decorative wrap.
FCCT — Flexible Ceramic Composite Technology.
Ceramic Pro describes its proprietary technology as FCCT — Flexible Ceramic Composite Technology.
The manufacturer positions this system as a more integrated protective composite structure.
The objective is to combine the flexibility required for installation around vehicle contours with surface properties associated with Ceramic Pro's protection technology.
For a vehicle such as the e.MAS 7, the ability of the film to conform to different body shapes matters.
The bonnet, bumper, wheel arches and rear quarter do not all share the same geometry.
A protective film must be suitably installed across those different areas while preserving the original design.
FCCT is a manufacturer-defined technology, not a laboratory measurement conducted on this photographed vehicle.
Published Film Thickness.
Ceramic Pro Malaysia lists CPF at approximately 205 microns, or 8 mils.
That specification describes the published film system.
It is not an independent thickness measurement from this particular e.MAS 7 installation.
Film thickness contributes to physical protection, but it is not the sole measure of quality.
Construction, top-coat performance, adhesive properties, optical clarity and installation workmanship also matter.
Self-Healing Surface.
CPF incorporates a self-healing surface designed to help suitable fine scratches and swirl marks become less visible under appropriate heat conditions.
For owners of a highly reflective paint finish, this can be an important characteristic.
Minor film-level surface marks may affect the way light reflects across a panel.
Self-healing properties can help preserve a more consistent appearance when the damage falls within the technology's capabilities.
However, deep cuts, missing film material and severe impacts cannot be repaired through self-healing.
Damaged film requires professional assessment.
Ceramic Surface Characteristics.
CPF also offers hydrophobic properties intended to make routine cleaning more manageable.
Water and certain contaminants may be easier to remove from a properly maintained protected surface.
However, hydrophobic does not mean contamination-proof.
Rainwater, minerals, bird droppings, tree sap and road grime can still leave deposits if neglected.
Regular washing remains necessary.
Protection Without a Colour Change.
One reason clear CPF suits this particular Proton is that it preserves the existing exterior colour.
Unlike coloured PPF, it is not designed to transform the vehicle's appearance.
The green paint remains the visual focus.
The film is intended to work as a protective layer above it.
This makes CPF relevant to owners who like their vehicle's factory appearance and want additional physical protection without selecting a new colour.
CPF vs Ceramic Coating
| Characteristic | Ceramic Pro CPF | Ceramic Coating |
|---|---|---|
| Physical film layer | Yes | No comparable PPF layer |
| Designed to help absorb minor stone impacts | Yes, within film limits | Not its primary purpose |
| Hydrophobic surface | Yes | Yes |
| High-gloss appearance | Yes | Yes |
| Heat-assisted self-healing | Suitable fine film-level marks | Not equivalent to self-healing PPF |
| Main purpose | Physical protection plus ceramic surface properties | Surface protection and easier maintenance |
04. The Installation
Protection, Applied With Precision.
A transparent film can be difficult to notice once the installation is complete.
During application, however, the process is highly visible.
The supplied photographs document clear sheets being positioned across the front end, fenders, side panels, rear quarter and tailgate of the Proton e.MAS 7.
Installation solution and loose film edges reveal the protective material before it is fitted into its final position.
These images provide authentic evidence of the project.
They do not represent every installation step or independently establish the exact preparation process, time required or fitting techniques used outside the photographed moments.
01 — Across the Front.
The first installation photograph shows a broad transparent film sheet stretched across the e.MAS 7's front end.
Two installers hold the film while its surface carries moisture from the application process.
The front lamps and bonnet remain visible behind the clear material.
This photograph provides an immediate sense of the film's scale.
The front of the vehicle contains multiple contours, requiring careful positioning around the existing panel shape.
02 — The Bumper and Headlamp.
The next image moves closer to the front bumper.
The film is visible around the headlamp and nearby lower body surfaces.
The clear material temporarily forms folds and reflections as it is positioned.
This is a normal visual feature of an application stage and should not be described as a defect in the finished installation.
The photograph highlights the e.MAS 7's front design, where sharp lighting elements sit above sculpted bumper areas.
03 — The Front Fender.
Another photograph shows a technician working across the front-fender area.
The protective film follows the wheel arch and adjacent painted surfaces.
The Proton's angular wheel design and green paint remain clearly visible.
This makes the photograph particularly useful for explaining clear PPF.
Although the protective material is visible during installation, the original exterior remains the surface that owners are trying to preserve.
04 — The Front Side Panel.
The next photograph captures the side of the vehicle near the front door and mirror.
An installer holds a section of clear film while application solution remains visible.
This area shows the transition from the front fender toward the door and window-surround geometry.
Each change in panel shape introduces a different consideration when positioning the film.
05 — Along the Side Body.
The fifth installation image shows film being positioned over a large side panel toward the rear.
The e.MAS 7's flush-style door handles and smooth body surfaces remain visible beneath the film.
This is one of the clearest demonstrations of how broader Full Wrap coverage differs from a front-only protection package.
The film extends to areas of the vehicle that are not necessarily the first point of impact from highway debris but are still exposed to everyday wear.
06 — The Rear Quarter.
At the rear, the bodywork transitions toward the tail lamp and wheel arch.
The next photograph shows a technician handling a clear film sheet around that region.
The film's loose section and application moisture make its presence visible.
The rear quarter demonstrates why a Full Wrap project requires attention to more than the bonnet and front bumper.
07 — The Tailgate.
The final installation image focuses on the rear of the vehicle.
The e.MAS 7 features a wide horizontal rear-light design, with the PROTON lettering positioned across the tailgate.
A transparent film sheet is being worked over the rear section.
This photograph demonstrates protection being extended to the rear bodywork as part of the broader Full Wrap approach.
Why Workmanship Matters.
The completed film should visually complement the original body design.
Achieving that result depends on suitable preparation, appropriate film handling, accurate positioning and careful finishing.
For the e.MAS 7, the supplied photographs document several areas with differing panel geometry.
The process illustrates why protection-film technology and installation experience must be considered together.
05. The Finished Vehicle
The Same Colour. A More Considered Future.
The finished e.MAS 7 remains visually distinctive.
There is no dramatic colour transformation.
The green finish is still the main feature.
What changes is the protective layer covering the agreed exterior surfaces.
In the finished photographs, light continues to travel across the bonnet, doors and rear bodywork.
The vehicle retains its original contours and contemporary SUV proportions.
The Front Portrait.
The first completed photograph shows the e.MAS 7 positioned against Ceramic Pro's illuminated workshop branding.
The front design is clean and symmetrical.
Slender headlamps frame the body, while the lower bumper forms a prominent horizontal structure.
The protected paint reflects the surrounding workshop lighting.
The Front Three-Quarter View.
Another image reveals more of the side profile.
The green finish extends across the bonnet, front fender and doors.
The front wheel and side-body proportions are clearly visible.
From this angle, the styling feels more expressive because the viewer can see how the front surfaces connect to the broader SUV body.
The Rear Three-Quarter View.
The next image shows the e.MAS 7 from behind.
The horizontal tail lamps, tailgate, rear-quarter shape and two-tone wheel design create a distinctive composition.
The metallic-looking green finish reflects overhead lighting across the rear and side surfaces.
This photograph reinforces the benefit of considering the exterior as a complete design rather than focusing only on the front.
The Rear Signature.
The final portrait focuses on the tailgate.
The PROTON lettering and e.MAS 7 badge identify the vehicle clearly.
The rear light design continues across the body, while the smooth tailgate surfaces retain their original appearance.
The image documents the completed vehicle; it does not quantify protective strength, gloss improvement or long-term durability.
06. Protection for Malaysian Driving
Everyday Roads Still Leave Their Mark.
The Proton e.MAS 7 introduces an electric powertrain, but the roads it travels remain familiar.
Malaysian drivers encounter highway debris, intense sunlight, sudden rain and environmental contamination.
These conditions create ongoing demands for vehicle care.
Stone chips may occur when small particles strike exposed painted panels.
Incorrect washing methods can introduce fine surface marks.
Bird droppings, tree sap and other contaminants can become more difficult to remove when neglected.
CPF is designed to help reduce selected risks through a protective film layer combined with ceramic surface characteristics.
Does PPF Prevent Every Stone Chip?
No.
PPF provides a physical barrier that can absorb or reduce certain minor impacts before they reach the paint.
However, the outcome depends on impact severity, the area struck, film condition and other factors.
Strong enough impacts can damage both the film and the painted surface beneath.
The protective film should be considered a risk-reduction measure, not a guarantee against all damage.
What About Washing?
A protected vehicle still requires proper washing.
Hydrophobic performance can make some cleaning tasks easier, but water spots and contamination can still occur.
Good washing practices help maintain the film's appearance and minimize unnecessary contact damage.
Aftercare During the First Week.
Ceramic Pro Malaysia advises avoiding washing newly installed CPF for the first seven days.
Owners should follow any additional project-specific curing instructions provided by the installer.
After the recommended period:
- Use a suitable pH-balanced automotive shampoo.
- Rinse loose contamination before touching the surface.
- Wash with clean microfiber materials.
- Avoid aggressive brushes and abrasive chemicals.
- Avoid high-pressure water directed closely at exposed film edges.
- Remove contaminants promptly.
- Seek professional inspection if lifting, deep cuts or persistent defects appear.
Understanding CPF Warranty Coverage.
Ceramic Pro Malaysia publishes a five-year warranty for qualifying CPF installations against specified manufacturing defects.
The warranty is subject to applicable registration, product conditions and exclusions.
The published CPF Full Wrap package also advertises five complimentary maintenance services, subject to its terms.
External impact damage, accidents, improper care and environmental contamination are not automatically covered by the manufacturing-defect warranty.
Explore Auto Bath Club.
For owners who want a convenient ongoing vehicle-cleaning routine, Auto Bath Club offers an additional car-care option.
Proper washing remains important whether performed personally or through a service provider.
Auto Bath Club is optional and should not be represented as mandatory for maintaining CPF warranty coverage.
07. The Verdict
A New Era Deserves Lasting Care.
The Proton e.MAS 7 is part of a changing automotive landscape.
Its electric platform and modern SUV design represent a different approach to everyday mobility.
But protecting the vehicle's appearance remains a familiar priority.
For this green example, Ceramic Pro CPF Full Wrap was selected to help preserve the original paint across the agreed exterior coverage.
The installation photographs show the clear film being positioned over the front, side and rear bodywork.
The completed portraits return attention to the vehicle itself.
That is the purpose of transparent paint protection film.
The appearance stays recognizably original.
The protective system works beneath the visual impression.
A new generation of driving. A more considered approach to protection.
A GUIDE FOR PROTECTION
Should You Install PPF on a New Electric Car?
The Proton e.MAS 7 project illustrates a practical question many new-car owners face.
When is the best time to consider paint protection?
For some drivers, the priority is preserving a fresh exterior before regular road use introduces visible marks.
Others are evaluating whether PPF is worth the cost, how much of the vehicle needs coverage and whether ceramic coating might be sufficient.
The right answer depends on the owner's expectations.
PPF is designed to provide a physical protective layer over suitable painted surfaces.
Ceramic coating serves a different purpose, focusing on surface properties and easier maintenance without providing the same film-based impact barrier.
A Full Front package may suit drivers primarily concerned about road debris affecting the front end.
A Full Wrap extends that protective approach to more of the vehicle's exterior.
For new electric cars such as the Proton e.MAS 7, the decision should be based on driving patterns, paint condition, coverage requirements and long-term ownership priorities—not on the powertrain alone.
Our Protection Guides explain these choices in greater detail.
Should You Install PPF on a New Car?
Understand when paint protection is worth considering, why timing matters and how to evaluate your priorities.
Should You Install PPF on a New Car?
Full Front vs Full Body PPF
Compare protection coverage, typical panel priorities and the differences between a targeted front package and a broader Full Wrap.
Does PPF Prevent Stone Chips?
Learn how transparent protective film works as a sacrificial barrier and understand the limits of stone-chip protection.
How to Maintain PPF
Understand the correct washing methods, curing considerations, edge maintenance and self-healing limitations.
Explore Ceramic Pro CPF
Discover Ceramic Pro Composite Protection Film, FCCT technology, package coverage, product specifications and warranty details.
Frequently Asked Questions
This Proton e.MAS 7 received Ceramic Pro Composite Protection Film, or CPF, under a Full Wrap package. CPF is a clear protective film combining a physical paint-protection layer with ceramic surface technology. The project photographs document application across selected front, side and rear body panels. The vehicle's original green exterior remains visible beneath the film.
Full Wrap PPF provides broader exterior coverage than a front-only protection package. It is suitable for owners who want to protect the agreed side and rear painted surfaces as well as common front-end impact areas. For this e.MAS 7, CPF Full Wrap was selected to help preserve the vehicle's original appearance. Exact component coverage follows the approved package schedule.
Ceramic Pro CPF is Composite Protection Film, a protective film system incorporating Flexible Ceramic Composite Technology (FCCT). It combines the physical barrier of PPF with ceramic-oriented surface characteristics intended to support gloss, hydrophobic performance and easier maintenance. Its purpose differs from a surface-only ceramic coating and from conventional decorative vinyl wrapping.
CPF is designed to help absorb or reduce certain minor stone-chip and road-debris impacts before damage reaches the underlying paint. However, protection depends on impact force, angle, film condition and other factors. Severe impacts can damage both the film and paint. CPF should not be described as stone-chip-proof or scratch-proof.
Ceramic Pro Malaysia publishes a thickness of approximately 205 microns, equivalent to around 8 mils, for CPF. This is a manufacturer-published product specification, not a measurement taken from the film installed on the photographed Proton. Film thickness is only one factor in overall performance; material construction, surface technology and installation also matter.
Ceramic Pro CPF incorporates a self-healing top surface designed to help suitable fine scratches and swirl marks become less visible under appropriate heat conditions. This can support the appearance of a glossy protective film. Deep scratches, cuts, punctures and missing film material cannot be restored through self-healing and may require professional inspection or replacement.
The two products serve different purposes. CPF provides a physical protective film layer designed to help reduce selected road-impact and abrasion risks while also offering ceramic-oriented surface characteristics. Ceramic coating is primarily a thin surface treatment that enhances properties such as gloss and water repellency. The appropriate choice depends on the owner's protection priorities, budget and intended coverage, not whether the vehicle is electric.
Ceramic Pro Malaysia publishes a five-year warranty for qualifying CPF against specified manufacturing defects, subject to product conditions and exclusions. The published CPF Full Wrap package also advertises five complimentary maintenance services under its applicable terms. Impact damage, accidents, improper care and environmental contamination are not automatically covered. Individual registration and entitlements must be confirmed.
Ceramic Pro Malaysia advises waiting seven days after CPF installation before washing, subject to the installer's instructions. Afterwards, use pH-balanced automotive shampoo, clean microfiber materials and gentle drying methods. Avoid abrasive brushes, harsh chemicals and aggressive pressure washing at film edges. Remove contaminants promptly and have film lifting or damage assessed professionally. Auto Bath Club may be explored as an optional maintenance service; it is not automatically required for CPF warranty compliance.

