A Tesla Model 3 represents a different approach to modern driving. Its minimalist exterior, smooth body lines and electric powertrain give it a distinctive character on Malaysian roads.
But while the drivetrain is electric, the vehicle's painted surfaces and windows remain exposed to familiar everyday conditions: loose road debris, sunlight, rain, airborne contaminants and frequent washing.
For this black Tesla Model 3, Ceramic Pro Malaysia combined three complementary protection services.
Ceramic Pro 9H Platinum provides ceramic surface protection, enhancing gloss, hydrophobic behaviour and everyday maintenance.
Ceramic Pro CPF Full Front adds a physical protective film across key front-facing areas exposed to road debris.
Magnus Pro Nano Ceramic Window Film addresses solar heat, UV exposure, glare and cabin comfort through a separate window-tint system.
Together, these installations illustrate how different forms of automotive protection can address different ownership priorities.
This Garage Journal follows the real installation photographs and explains what each system does, how the packages differ and how to maintain the completed vehicle.
INSTALLATION AT A GLANCE
- Vehicle
- Tesla Model 3
- Exterior
- Black
- Ceramic coating
- Ceramic Pro 9H
- Coating package
- Platinum
- Paint protection film
- Ceramic Pro CPF
- PPF coverage
- Full Front
- Window film
- Magnus Pro Nano Ceramic
Platinum includes approved interior, glass and wheel coating in addition to exterior coating treatments. Each service remains a distinct product and package.
01. Why Choose Three Protection Systems?
Each protection service addresses a different challenge.
A car's painted exterior can develop surface contamination, minor swirl marks and gradually changing gloss.
Its front-facing bodywork may encounter loose stones and road debris at highway speeds.
The cabin can also experience significant solar exposure through the vehicle's glass.
No single product should be presented as automatically solving every issue.
The important distinction is the function of each system.
Ceramic Pro 9H Platinum — surface performance
Ceramic coating enhances the finish and provides hydrophobic, chemical-resistant surface characteristics that support routine cleaning.
Ceramic Pro CPF Full Front — physical paint protection
Paint protection film creates a sacrificial physical barrier over the selected panels, helping reduce damage from certain small impacts and light abrasions.
Magnus Pro Nano Ceramic — solar control
Window film is installed on automotive glass to improve solar heat management, UV protection, glare control and driving comfort.
This combination is not simply three layers of the same protection.
It is an arrangement of complementary technologies selected for the vehicle's painted surfaces, exposed front-end panels and windows.
02. Ceramic Pro 9H Platinum — Beyond Exterior Gloss
Platinum includes approved interior, glass and wheel protection; no interior-treatment photograph is supplied, and exact treated materials follow the installation record.
Ceramic Pro 9H is a multi-layerable nano-ceramic coating engineered to bond with suitable painted surfaces.
Its benefits include enhanced gloss, hydrophobic water behaviour, easier cleaning and resistance to certain environmental contaminants.
On black paintwork, surface preparation is particularly important because reflected light can reveal fine imperfections and washing marks.
The photographs of this Tesla Model 3 show professional application activity and infrared curing equipment during the installation process.
Ceramic coating must be distinguished from paint protection film. It is not intended to absorb stone impacts in the same way as a physical film.
What Platinum includes
The Ceramic Pro Platinum package encompasses more than paint coating.
Its confirmed scope includes:
- Exterior Ceramic Pro coating.
- Interior surface protection.
- Glass coating.
- Wheel coating.
The exact treatment of individual materials must be based on the approved package specification and installation record.
Interior protection
Interior protection deserves attention because drivers regularly contact seats, armrests, dashboards and door panels.
Ceramic Pro has dedicated treatment products for suitable interior materials, including Ceramic Pro LEATHER for compatible leather/vinyl surfaces and Ceramic Pro PLASTIC for compatible trim.
These products are designed to help make appropriate interior surfaces more resistant to daily contamination and easier to maintain.
The upholstery material and individual interior products used on this Tesla have not been confirmed. Compatible materials and exact treatment areas follow the installation record; no genuine-leather claim is made.
Glass and wheel protection
Platinum also includes glass and wheel coating.
Ceramic Pro GLASS is intended to support water repellency on suitable glass surfaces.
Ceramic Pro WHEEL & CALIPER products provide protection suited to the operating environment of wheels and brake components.
Infrared curing
The provided photographs show infrared equipment positioned beside the Tesla during installation.
Infrared curing is used within Ceramic Pro's coating workflow to assist the approved curing process.
Platinum warranty
Ceramic Pro Malaysia currently publishes a seven-year warranty for the Platinum coating package, subject to the approved warranty conditions and maintenance programme.
This is not a guarantee against all scratches, stone impacts, accidents or water spots.
03. Ceramic Pro CPF Full Front — Protection Where It Counts
While ceramic coating improves surface characteristics, physical road debris requires a different protective approach.
Ceramic Pro Composite Protection Film (CPF) places a transparent protective layer over selected exterior panels.
For this Tesla Model 3, the chosen package is FULL FRONT.
According to Ceramic Pro Malaysia's current CPF package specification, Full Front coverage includes:
- Front bonnet.
- Front bumper.
- Front fenders.
- Headlamps.
- Side mirrors.
- Door cups.
These are the package's approved coverage areas, subject to vehicle compatibility and the actual installation record.
Why target the front?
The front-facing parts of a vehicle are typically more directly exposed to small road stones and airborne debris when driving.
For owners regularly using Malaysian expressways, protecting these areas can be a practical compromise between targeted paint protection and a full-body PPF installation.
The supplied photographs show the transparent film being handled and positioned over the Tesla's front bonnet and headlamp area.
These are examples of actual installation work rather than simulated product demonstrations.
Ceramic Pro CPF technology
Ceramic Pro CPF combines physical film protection with its integrated ceramic surface technology.
Its published design incorporates Flexible Ceramic Composite Technology, or FCCT, together with ION Exchange technology.
The system is intended to combine the protective characteristics of paint protection film with surface properties such as gloss, water repellency and cleaning convenience.
The film is designed to help reduce damage from certain stone chips, minor road debris and fine surface abrasions.
Fine scratches in its self-healing layer may recover with suitable heat.
However, deep cuts, severe impacts and punctures are not guaranteed to self-heal.
CPF is not a substitute for safe driving and does not make any vehicle collision-proof.
How CPF and 9H work together
CPF and Ceramic Pro 9H serve different purposes within this installation.
CPF provides physical protection on the selected Full Front panels.
Platinum ceramic coating supplies its approved coating benefits and additional surface treatments within the confirmed package scope.
CPF warranty
Ceramic Pro Malaysia publishes a five-year warranty for CPF against specified manufacturing defects, subject to the applicable warranty terms.
This differs from the seven-year Platinum ceramic coating warranty.
The installation record has not specified whether 9H was applied over or under the CPF. Compatibility, sequencing and panel-by-panel application follow the approved process.
04. Magnus Pro Nano Ceramic Window Tint — Comfort Beyond the Paint
Paint protection is only one part of vehicle ownership.
Glass introduces a different challenge because sunlight carries visible light, ultraviolet radiation and infrared energy into the cabin.
Magnus Pro Nano Ceramic Window Film is engineered to help manage these conditions through multi-layer window-film technology.
For this Tesla Model 3, the installed tint product is Magnus Pro Nano Ceramic.
Its intended benefits include:
- Solar heat rejection.
- UV protection.
- Glare reduction.
- Optical clarity.
- Improved everyday driving comfort.
How Nano Ceramic window film works
Magnus Pro publishes a multi-layer construction including PET film, adhesive, nano-ceramic components, UV and infrared rejection elements, glare-control properties and a scratch-resistant hardcoat.
These layers are engineered to manage solar energy and visibility.
The specific final performance depends on the selected film variant and the vehicle's original glazing.
Why TSER matters
Total Solar Energy Rejection, or TSER, is a useful measure when comparing window-film heat-management performance.
Unlike an infrared-only figure, TSER considers the broader solar-energy spectrum.
This helps drivers evaluate performance rather than relying exclusively on how dark the film appears.
Tint installation
The supplied images show professional installation activity involving wet window film and squeegee finishing.
Correct installation requires attention to the glass surfaces, alignment, finishing and the manufacturer's curing instructions.
The photographs demonstrate workmanship, but they do not independently establish a particular VLT level or that every glass panel was tinted.
JPJ compliance
In Malaysia, the final visible light transmission of installed automotive glass must comply with the applicable JPJ requirements.
For ordinary private passenger vehicles, the published general minimum is 70% VLT for the front windscreen and 50% for the front side windows.
Compliance depends on the combined VLT of the original glass and installed window film.
The exact film specification on this Tesla has not been provided. Vehicle-specific JPJ compliance requires the relevant measurement and installation record.
Magnus Pro Nano Ceramic window film currently carries a ten-year warranty against specified manufacturing defects, subject to applicable terms.
05. Behind the Installation — Three Services, One Vehicle
The supplied photographs document several stages of the Tesla's protection work.
Paint coating preparation and application
The three coating-process photographs show sprayed surface-treatment activity around the front bonnet, side panels and rear-side trim. They document work on the black exterior but do not independently identify the chemical in the spray equipment.
Infrared curing
Infrared equipment is positioned beside the Tesla during coating-related work to assist the approved curing process; no specific temperature or curing schedule is established by the photograph.
CPF front-end installation
The two CPF photographs show clear-film positioning across the bonnet and headlamp contours, illustrating careful handling and alignment of the selected front-end protection.
Window-film installation
The two window-film photographs show wet-film application and squeegee finishing on glass; they do not establish an installed VLT shade or every treated window.
06. Finished in Black — The Final Presentation
The finished photographs show a black Tesla Model 3 with smooth reflective bodywork, a minimalist front profile, distinctive lighting and clean exterior contours.
Black paint makes the visual result particularly expressive under workshop lighting.
The combination of treatments was chosen to address appearance, physical paint protection and driving comfort through different technologies.
The final appearance should be described as the photographed completed result, not as evidence of a measurable improvement in hardness, heat rejection or impact resistance.
The value of the installation lies in selecting the right protective solution for each surface and understanding its limitations.
07. Guide for Protection — Which System Does What?
Owners considering protection for a new Tesla Model 3 should begin by identifying what matters most to them.
Choose ceramic coating when gloss, hydrophobic properties, exterior maintenance and approved additional surface treatments are the main priorities.
Choose paint protection film when protection against certain physical stone impacts and road debris is important, especially across the front-facing panels.
Choose Nano Ceramic window tint when solar comfort, glare control, visibility and UV management are the priority.
These services are complementary, but they do not necessarily have to be purchased together.
The ideal configuration depends on usage, preferred coverage, available budget and the owner's expectations.
08. Aftercare — Protecting the Protection
All three services require appropriate initial curing and ongoing maintenance.
The most important principle is to follow the installer's specific aftercare instructions because paint coating, PPF and window film can have different curing requirements.
For Ceramic Pro CPF, the official Malaysian guidance advises avoiding washing for the first seven days.
After the applicable curing period, wash the vehicle using pH-balanced automotive shampoo, clean microfiber materials and gentle techniques.
Avoid abrasive brushes, harsh chemicals, dry wiping and directing high-pressure water at exposed film edges.
For window tint, follow the installer's instructions before lowering treated windows or cleaning the inside of the glass.
Some temporary moisture-related visual effects may occur during curing. Persistent or unusual defects should be assessed by the installer.
Avoid abrasive products on protected interior surfaces.
To maintain the vehicle's exterior appearance, regular professional or careful home washing is recommended.
Owners can also explore Auto Bath Club for convenient routine car care.
Auto Bath Club is an optional service; it is not mandatory and does not automatically guarantee coating, PPF or tint warranty compliance.
09. Final Perspective — Protection Built Around Real Driving
This Tesla Model 3 demonstrates why automotive protection should be understood as a combination of distinct solutions rather than a single universal treatment.
Ceramic Pro 9H Platinum addresses surface appearance and maintenance, with additional protection for approved interior, glass and wheel surfaces.
Ceramic Pro CPF Full Front adds a physical protective layer where road debris exposure is commonly more concentrated.
Magnus Pro Nano Ceramic Window Film focuses on solar management and cabin comfort.
Each serves a different purpose, and each requires the correct installation and maintenance.
For owners exploring how to protect a new Tesla Model 3 in Malaysia, this installation provides a real photographic example of how ceramic coating, paint protection film and window tint can be combined within a coordinated protection plan.
Frequently Asked Questions
This Tesla Model 3 received three protection services: Ceramic Pro 9H Platinum ceramic coating, Ceramic Pro CPF Full Front paint protection film and Magnus Pro Nano Ceramic window film. They serve different purposes. Platinum enhances coated-surface performance and includes approved interior, glass and wheel treatments. CPF provides a physical protective layer on selected front-facing panels. Nano Ceramic window film improves solar heat management, UV protection and everyday driving comfort.
Yes. Ceramic Pro Malaysia's Gold and Platinum coating packages include interior, glass and wheel coating alongside their approved exterior protection scope. Suitable products are selected for different materials. For example, Ceramic Pro LEATHER and PLASTIC are intended for compatible interior surfaces, while dedicated glass and wheel coatings address those surfaces. Exact applications must follow the approved package and vehicle-specific installation record.
Ceramic coating and PPF provide different benefits. Ceramic Pro 9H primarily enhances surface gloss, hydrophobic behaviour and cleaning convenience. Ceramic Pro CPF is a physical protective film that helps reduce damage from certain stone chips, minor abrasions and road debris. Combining the services allows suitable surfaces to receive different types of protection. The exact application sequence and any coating over film must follow approved product compatibility instructions.
Ceramic Pro Malaysia's published CPF Full Front package includes the bonnet, front bumper, front fenders, headlamps, side mirrors and door cups, subject to vehicle-specific compatibility. It focuses on the exterior areas commonly exposed to road debris. This is not a full-body PPF installation, and it does not automatically include rear doors, rear quarter panels, the tailgate or roof.
No. Ceramic Pro 9H is a nano-ceramic surface coating designed to enhance gloss, water repellency and resistance to certain environmental contaminants. It does not create the same physical impact barrier as paint protection film. For owners concerned about stone chips on highways, an appropriate PPF package provides a different type of protection. Neither system makes a vehicle completely damage-proof.
Ceramic Pro Malaysia publishes a seven-year warranty for the Platinum coating package, a five-year warranty for Ceramic Pro CPF against specified manufacturing defects and a ten-year warranty for Magnus Pro Nano Ceramic window film against specified manufacturing defects. These are separate warranties with different covered surfaces, exclusions and maintenance conditions. They must not be combined into one universal warranty or interpreted as guarantees against all damage.
Magnus Pro Nano Ceramic Window Film is designed to improve solar heat rejection, UV protection, glare control and optical clarity. These characteristics can contribute to a more comfortable cabin during sunny conditions. The results depend on the selected film variant, vehicle glazing and environmental conditions. Without the actual installed film specification, no exact heat-rejection percentage or temperature-reduction claim should be made for this Tesla.
Compliance depends on the film selected and the completed glass-and-film VLT measurement. For standard private passenger cars in Malaysia, the general minimum VLT requirements are 70% for the front windscreen and 50% for the front side windows. Eligible rear windows have different requirements. A film's advertised VLT alone does not guarantee compliance because the original glass also affects the final reading.
Follow the installer's curing instructions for the combined protection services. Ceramic Pro Malaysia advises avoiding washing for the first seven days after CPF installation. Afterwards, use pH-balanced shampoo, clean microfiber materials and gentle drying. Avoid harsh chemicals, abrasive brushes and directing high-pressure water against exposed PPF edges. Regular careful washing helps maintain coated and filmed surfaces. Owners can also explore Auto Bath Club for optional routine car care, subject to the vehicle's aftercare requirements.
Full Front focuses on the bonnet, bumper, front fenders and other front-facing areas commonly exposed to road debris. Full Wrap provides broader coverage across suitable painted body panels, including side and rear areas. Full Front can be a practical option for owners prioritizing targeted protection. Full Wrap may suit drivers who want more extensive coverage. The choice depends on driving habits, budget, the vehicle's exposure and expected ownership period.

